DG180 — Centrifugal Fan
SUNXFAN DG180 series: 4 models. All figures below are manufacturer datasheet values.
Model matrix
| Model | Airflow | Max static pressure | Voltage | Power | Speed | Noise | Speed control |
|---|---|---|---|---|---|---|---|
| DG180A-E092E1-01 | 960 m³/h | 360 Pa | 115 V AC | 175 W | 1320 r/min | 66 dB(A) | 0-10V/PWM / 4-speed |
| DG180A-E092E3-01 | 960 m³/h | 360 Pa | 230 V AC | 175 W | 1320 r/min | 66 dB(A) | 0-10V/PWM / 4-speed |
| DG180B-E092D1-01 | 780 m³/h | 330 Pa | 115 V AC | 120 W | 1350 r/min | 67 dB(A) | 0-10V/PWM / 3-speed |
| DG180B-E092D3-01 | 780 m³/h | 330 Pa | 230 V AC | 120 W | 1350 r/min | 67 dB(A) | 0-10V/PWM / 3-speed |
DG180A-E092E1-01 — EC180 Single inlet Centrifugal Fan — 960 m³/h
Specifications
- Category: Centrifugal Fan
- Motor: EC
- Airflow: 960 m³/h
- Max static pressure: 360 Pa
- Voltage: 115 V AC
- Power: 175 W
- Speed: 1320 r/min
- Noise: 66 dB(A)
- Protection: IP44
- Temperature: -25 °C ~ +60 °C
- Impeller: PP+GF
- Bearing: NSK ball bearing
- Speed control: 0-10V/PWM / 4-speed
- MOQ: 96 PCS
- FOB: FOB Nansha Guangzhou
- Lead time: 25-30 days
FAQ
Q: When is a 330–360 Pa, high-airflow blower the right choice?
A: When the resistance is short and honest: condensing-unit discharge, appliance exhaust up a short stack, cabinet air exchange through a grille and maybe one bend. 780–960 m³/h at 330–360 Pa moves serious volume through such paths without paying the noise and power premium of a high-pressure wheel fighting an open system. The mistake to avoid is the reverse: a 700 Pa-class blower on a 150 Pa system rides far off its design point, wastes energy and sounds harsh.
Q: 4-speed taps or 0-10V/PWM — how do I choose?
A: The 4-speed taps serve uncontrolled installs: a technician sets one point with a jumper or switch — kitchen boost, condenser duty, appliance exhaust — and the fixed steps guarantee repeatable airflow and noise. 0-10V/PWM is for when a controller or BMS will trim speed against a sensor. On fixed duty, land the tap on your actual system curve rather than defaulting to the fastest: each step down buys several dB(A) and a cubic saving in power.
Q: What does the PP impeller contribute here?
A: Glass-fibre-filled polypropylene keeps wheel mass low: gentle bearing loads over years of continuous running and little start inertia for the EC motor. It is intrinsically corrosion-proof — salt air, humidity and cleaning-agent traces that pit coated steel leave it untouched, which is why appliance and marine-air-conditioning duty favours it. The honest trade is temperature: respect the −25 ~ +60 °C envelope; for airstreams that live near that ceiling, specify a steel-wheel blower instead.
DG180A-E092E3-01 — EC180 Single inlet Centrifugal Fan — 960 m³/h
Specifications
- Category: Centrifugal Fan
- Motor: EC
- Airflow: 960 m³/h
- Max static pressure: 360 Pa
- Voltage: 230 V AC
- Power: 175 W
- Speed: 1320 r/min
- Noise: 66 dB(A)
- Protection: IP44
- Temperature: -25 °C ~ +60 °C
- Impeller: PP+GF
- Bearing: NSK ball bearing
- Speed control: 0-10V/PWM / 4-speed
- MOQ: 96 PCS
- FOB: FOB Nansha Guangzhou
- Lead time: 25-30 days
DG180B-E092D1-01 — EC180 Single inlet Centrifugal Fan — 780 m³/h
Specifications
- Category: Centrifugal Fan
- Motor: EC
- Airflow: 780 m³/h
- Max static pressure: 330 Pa
- Voltage: 115 V AC
- Power: 120 W
- Speed: 1350 r/min
- Noise: 67 dB(A)
- Protection: IP44
- Temperature: -25 °C ~ +60 °C
- Impeller: galvanised sheet steel
- Bearing: NSK ball bearing
- Speed control: 0-10V/PWM / 3-speed
- MOQ: 96 PCS
- FOB: FOB Nansha Guangzhou
- Lead time: 25-30 days
DG180B-E092D3-01 — EC180 Single inlet Centrifugal Fan — 780 m³/h
Specifications
- Category: Centrifugal Fan
- Motor: EC
- Airflow: 780 m³/h
- Max static pressure: 330 Pa
- Voltage: 230 V AC
- Power: 120 W
- Speed: 1350 r/min
- Noise: 67 dB(A)
- Protection: IP44
- Temperature: -25 °C ~ +60 °C
- Impeller: galvanised sheet steel
- Bearing: NSK ball bearing
- Speed control: 0-10V/PWM / 3-speed
- MOQ: 96 PCS
- FOB: FOB Nansha Guangzhou
- Lead time: 25-30 days
Last updated: 2026-11-02