BC250 — Centrifugal Fan
SUNXFAN BC250 series: 7 models. All figures below are manufacturer datasheet values.
Model matrix
| Model | Airflow | Max static pressure | Voltage | Power | Speed | Noise | Speed control |
|---|---|---|---|---|---|---|---|
| BC250A-A092D3-01 | 1400/1800 m³/h | 615 Pa | 230 V AC 50/60Hz | 175/230 W | 2600/2850 r/min | 74 dB(A) | 3-speed |
| BC250A-D092A8-01 | 1450 m³/h | 760 Pa | 48 VDC | 160 W | 2600 r/min | 71±2 dB(A) | 0-10V/PWM |
| BC250A-E072B3-01 | 1080 m³/h | 590 Pa | 230 V AC | 120 W | 2000 r/min | 64 dB(A) | 0-10V/PWM / Modbus RTU(RS485) |
| BC250A-E092D1-01 | 1080 m³/h | 740 Pa | 115 V AC | 125 W | 2300 r/min | 68 dB(A) | 0-10V/PWM / Modbus RTU(RS485) |
| BC250A-E092D3-02 | 1420 m³/h | 740 Pa | 230 V AC | 160 W | 2600 r/min | 74 dB(A) | 0-10V/PWM / Modbus RTU(RS485) |
| BC250A-E092E1-02 | 1420 m³/h | 740 Pa | 115 V AC | 160 W | 2600 r/min | 74 dB(A) | 0-10V/PWM / Modbus RTU(RS485) |
| BC250A-E092E3-03 | 1680 m³/h | 750 Pa | 230 V AC | 240 W | 3050 r/min | 77 dB(A) | 0-10V/PWM / Modbus RTU(RS485) |
BC250A-A092D3-01 — AC250 Backward-Curved Centrifugal Fan — 1400 m³/h
Specifications
- Category: Centrifugal Fan
- Motor: AC
- Airflow: 1400/1800 m³/h
- Max static pressure: 615 Pa
- Voltage: 230 V AC 50/60Hz
- Current: 0.8/1.0 A
- Power: 175/230 W
- Speed: 2600/2850 r/min
- Noise: 74 dB(A)
- Protection: IP54
- Temperature: -25 °C ~ +60 °C
- Impeller: Galvanized steel
- Bearing: NSK ball bearing
- Speed control: 3-speed
- MOQ: 160 PCS
- FOB: FOB Nansha Guangzhou
- Lead time: 25-30 days
FAQ
Q: Belt-drive or direct-drive centrifugal — why is everything going direct?
A: Belts eat 2–5% in transmission losses, need periodic tensioning and replacement, and force alignment work at every service. Direct-drive EC — as on this BC250 — removes all of it: the wheel sits on the motor shaft, efficiency is higher, maintenance approaches zero, and speed control comes from the motor electronics instead of a mechanical sheave change.
Q: How do I convert these m³/h and Pa figures to CFM and inches of water?
A: 1 m³/h = 0.589 CFM and 1 Pa = 0.00402 in. w.g. So the BC250’s 1,080–1,680 m³/h at 590–760 Pa reads as roughly 636–989 CFM at 2.4–3.1 in. w.g. Keep source units when comparing against published fan curves — rounding mid-conversion is a classic way to land on the wrong impeller.
Q: What routine maintenance does an EC centrifugal fan need?
A: Very little by design: bearings are sealed and greased for life, and there is no belt or commutator to wear. The two jobs that matter are cleaning the impeller — dust buildup unbalances the wheel and shows up as vibration before anything else — and re-checking mounting fasteners after the first few hundred hours. A yearly clean-and-vibration pass is a sound default for continuous-duty installs.
BC250A-D092A8-01 — DC250 Backward-Curved Centrifugal Fan — 1450 m³/h
Specifications
- Category: Centrifugal Fan
- Motor: DC
- Airflow: 1450 m³/h
- Max static pressure: 760 Pa
- Voltage: 48 VDC
- Power: 160 W
- Speed: 2600 r/min
- Noise: 71±2 dB(A)
- Protection: IP54
- Temperature: -25 °C ~ +60 °C
- Impeller: PA6+GF25%
- Bearing: NSK ball bearing
- Speed control: 0-10V/PWM
- MOQ: 160 PCS
- FOB: FOB Nansha Guangzhou
- Lead time: 25-30 days
BC250A-E072B3-01 — EC250 Backward-Curved Centrifugal Fan — 1080 m³/h
Specifications
- Category: Centrifugal Fan
- Motor: EC
- Airflow: 1080 m³/h
- Max static pressure: 590 Pa
- Voltage: 230 V AC
- Power: 120 W
- Speed: 2000 r/min
- Noise: 64 dB(A)
- Protection: IP54
- Temperature: -25 °C ~ +60 °C
- Impeller: PA6+GF25%
- Bearing: NSK ball bearing
- Speed control: 0-10V/PWM / Modbus RTU(RS485)
- MOQ: 160 PCS
- FOB: FOB Nansha Guangzhou
- Lead time: 25-30 days
BC250A-E092D1-01 — EC250 Backward-Curved Centrifugal Fan — 1080 m³/h
Specifications
- Category: Centrifugal Fan
- Motor: EC
- Airflow: 1080 m³/h
- Max static pressure: 740 Pa
- Voltage: 115 V AC
- Power: 125 W
- Speed: 2300 r/min
- Noise: 68 dB(A)
- Protection: IP54
- Temperature: -25 °C ~ +60 °C
- Impeller: PA6+GF25%
- Bearing: NSK ball bearing
- Speed control: 0-10V/PWM / Modbus RTU(RS485)
- MOQ: 160 PCS
- FOB: FOB Nansha Guangzhou
- Lead time: 25-30 days
BC250A-E092D3-02 — EC250 Backward-Curved Centrifugal Fan — 1420 m³/h
Specifications
- Category: Centrifugal Fan
- Motor: EC
- Airflow: 1420 m³/h
- Max static pressure: 740 Pa
- Voltage: 230 V AC
- Power: 160 W
- Speed: 2600 r/min
- Noise: 74 dB(A)
- Protection: IP54
- Temperature: -25 °C ~ +60 °C
- Impeller: PA6+GF25%
- Bearing: NSK ball bearing
- Speed control: 0-10V/PWM / Modbus RTU(RS485)
- MOQ: 160 PCS
- FOB: FOB Nansha Guangzhou
- Lead time: 25-30 days
BC250A-E092E1-02 — EC250 Backward-Curved Centrifugal Fan — 1420 m³/h
Specifications
- Category: Centrifugal Fan
- Motor: EC
- Airflow: 1420 m³/h
- Max static pressure: 740 Pa
- Voltage: 115 V AC
- Power: 160 W
- Speed: 2600 r/min
- Noise: 74 dB(A)
- Protection: IP54
- Temperature: -25 °C ~ +60 °C
- Impeller: PA6+GF25%
- Bearing: NSK ball bearing
- Speed control: 0-10V/PWM / Modbus RTU(RS485)
- MOQ: 160 PCS
- FOB: FOB Nansha Guangzhou
- Lead time: 25-30 days
BC250A-E092E3-03 — EC250 Backward-Curved Centrifugal Fan — 1680 m³/h
Specifications
- Category: Centrifugal Fan
- Motor: EC
- Airflow: 1680 m³/h
- Max static pressure: 750 Pa
- Voltage: 230 V AC
- Power: 240 W
- Speed: 3050 r/min
- Noise: 77 dB(A)
- Protection: IP54
- Temperature: -25 °C ~ +60 °C
- Impeller: PA6+GF25%
- Bearing: NSK ball bearing
- Speed control: 0-10V/PWM / Modbus RTU(RS485)
- MOQ: 160 PCS
- FOB: FOB Nansha Guangzhou
- Lead time: 25-30 days
Last updated: 2026-11-02